X

About Us

The argument in favor of using filler text goes something like this: If you use real content in the Consulting Process, anytime you reach a review point you’ll end up reviewing and negotiating the content itself and not the design.

Consultation

Contact Info

  • Chicago 12, Melborne City, USA
  • (111) 111-111-1111
  • globex@gmail.com
  • Week Days: 09.00 to 18.00 Sunday: Closed

Load Cell (Resistive SG)

Load Cell (Resistive SG)

Introduction:

The Resistive Strain Gauge Load Cells of PMT are designed and developed to measure tensile loads in tieback anchors, rock bolts or compressive loads in structures. Electrical resistance strain gages are bonded in full bridge configurations to the periphery of the spool for temperature stability and for compensation of eccentric loading. When load is applied on the cell, the strain gauges output electric signal which is transmitted to the readout unit.

Features:

  • - Rugged and robust construction
  • - Hostile & severe environmentally friendly
  • - Temperature compensated
  • - Eight or more strain gages incorporated to reduce positioning effect
  • - Any standard strain gage bridge measuring read-out device can be used

Specifications:

Sensor type Resistive Strain Gauge
Capacity up to 10,000 kN
Over Range 100% F.S.
Accuracy ±0.5% F.S.
Temperature Range -20 to 80° C
Non-Linearity ± 1 % fs
Output YSI 44005 or equivalent
Excitation Six core shielded 5 m long
Terminal Resistance (3500/5000 kN)
Input 770 Ohm ± 5 %
Output 700 Ohm ± 1 %
Terminal Resistance (Above 5000 kN)
Input 1540 Ohm ± 5 %
Output 1400 Ohm ± 1 %
Temperature Limit -20° to 80°C
Cable Connection Four core shielded 5 m long/or as specified